LX490W
LX490W
LX490W
LX490W
LX490W
LX490W
LX490W
LX490W
LX490W
LX490W
LX490W
LX490W

LX490WLX490W

This 49" widescreen monitor is ideal for viewing DICOM X-ray images or as a second monitor in surgical environments. Numerous input and output signals, the ability to combine pictures, and factory pre-calibrated gamma models enable usage in a wide range of applications. With its fanless construction and the watertight, easy-to-clean front surface, the monitor is perfectly suited to sterile hospital environments.

• Five factory-set DICOM and Gamma 2.2 lookup tables for optimal medical image reproduction
• Quick adaptation to different environments and procedures
• Numerous video inputs and outputs for increased connectivity
• Flexible image arrangement with "picture in picture" (PiP) and "picture and picture" (PaP) functions
• Fully automated brightness stability through ISS (Integrated Stability System)

This product is not produced anymore, but may still be available from stock.
Please contact your sales partner for more information.

特性
Monitor - LX49xW - Image Diagonal

大屏显示

该监视器的对角线尺寸为49英寸,分辨率为1920 x 1080像素,适合同时显示不同的影像源。例如,在手术环境中可以并排显示DICOM X射线和内窥镜影像。大屏幕使该监视器非常适合安装在OP墙上并可从较远的距离观看影像。影像可以全屏缩放,以原始尺寸复制,或者通过PiP和PaP功能彼此相邻显示。

Monitor - Comfortably View from Any Angle

任何角度均可舒适观看

宽视角允许从侧面以最小的色偏观看显示器,从而为从不同角度同时观看的多个人提供高质量的图像。

预设查询表

监视器在出厂时已预先校准。该监视器具有五个面向应用程序的查找表(LUT)预设和一个用户可配置的LUT功能,易于安装和维护。它可以根据需要快速适应当地的观看和照明条件或应用程序偏好。

Monitor - LX490W - Various Inputs

Numerous Video Inputs

The monitor can be connected to imaging systems via the various video inputs, such as DVI, HDMI, HD-SDI, Composite, S-Video and VGA. The monitor can be simultaneously connected to both digital and traditional video signals (PAL, NTSC, HD). If necessary, the video input settings can be adjusted using the OSD (On Screen Display) menu.

Monitor - LX49xW - PiP

同时显示不同的影像源

监视器具有宽屏格式,可以以“画中画”(PiP)或画边画(PaP)方式显示各种输入信号。这减少了对额外监视器的需求,从而允许用户在查看关键源影像的同时保持对其他重要信息的查看。

Monitor - LX49xW - LED

LED背光

监视器配备了针对明亮环境优化的LED背光灯。LED技术可确保即使在高亮度设置下也可以提供较长的使用寿命。

Monitor - Quick Brightness Stabilisation

快速亮度稳定,可即时查看

EIZO的全自动稳定性功能利用内部背光传感器来快速稳定启动时的亮度水平,并补偿由于环境温度和时间推移所引起的亮度波动。

Monitor - LX49xW - Diagnostic Precision with Factory Adjustment

工厂内调整诊断精度

为确保尽可能显示最准确一致的灰阶,EIZO在产品出厂前会仔细测量并设定每一灰阶色调,以提供完全符合DICOM Part 14或伽玛2.2要求的显示器。

Monitor - EX271W - Safety Glass

安全防护玻璃

防反射夹层安全玻璃可确保出色的影像质量,同时可在手术过程中或清洁消毒显示器时保护显示器免受刮擦损坏或液体进入。

Monitor - Fanless Silent Design

无风扇静音设计

监控器经过专门设计,无需风扇即可散热,不会产生干扰性的噪音,不会传播灰尘和细菌,也不会干扰手术室内的受控层流。

规格

General

Cabinet ColorBlack, White
Certifications & Standards (Please contact EIZO for the latest information)CE (Medical Device Directive), IEC/EN60601-1, EN60950-1, CAN/CSA C22.2 No. 60601-1-08, UL60601-1, GB4943.1 (non-tropical, altitude<2000 m), FCC-B, RCM, RoHS, China RoHS, WEEE, CCC
Supplied Accessories (May vary by country. Please contact EIZO for details)AC power Cord (eu, us, jp, cn), signal cable (DVI-D - DVI-D), remote control, Utility Disk (PDF Instructions for Use)

Panel

TypeColor TFT LCD Panel (IPS)
BacklightLED
Size123 cm / 48.5" (1232 mm diagonal)
Native Resolution1920 x 1080 (16:9 aspect ratio)
Viewable Image Size (H x V)1073.8 x 604 mm
Pixel Pitch0.55926 mm x 0.55926 mm
Display Colors10-bit colors: 1.07 billion colors
Viewing Angles (H / V, typical)178°, 178°
Brightness (typical)700 cd/m²
Contrast Ratio (typical)1300:1
Response Time (typical)8 ms (midtone)

Video Signals

Digital Scanning Frequency (H / V)30 - 91 kHz / 48 - 85 Hz
Analog Scanning Frequency (H / V)30 - 91 kHz / 48 - 85 Hz
Sync FormatsSync Separate, Composite Sync und SoG

USB

Downstream1 upstream, 2 downstream

Interface Specifications

Input TerminalsDVI-I x 1; HDMI x 1, BNC (HD-SDI) x 1, BNC (Composite) x 1, D-Sub mini 15pin (Separate Sync, Composite Sync, SoG*, YPbPr*, RGBS*, RGB/HV*) x 1, 4pin mini-Din (S-Video) x 1
*adapter (D-Sub mini 15pin - BNC) required
Output TerminalsBNC (HD-SDI) x 1, BNC (Composite) x 1, 4pin mini-Din (S-Video) x 1, D-Sub mini 15pin (VGA) x 1

Power

Power RequirementsAC 100 - 240 V / 50 - 60 Hz
Power ConsumptionMaximum: 144 W
Typical: 85 W
Power Save Mode19 W
Power ManagementDVI DMPM

Features & Functions

SensorBacklight Sensor
OSD LanguagesEnglish, German

Environmental Requirements

Degree of ProtectionFront: IP65
Rear: IP20

Physical Specifications

Net Weight (without Stand)31 kg
Hole Spacing (VESA Standard)200 x 400 mm, M8, depth 10 - 30 mm
外形尺寸
LX490W
资料下载

彩页

Single Product Brochure LX490W

Single Product Brochure LX490W

417.94 KB

下载 / 在浏览器中打开

手册

Instructions for Use LX490W

Instructions for Use LX490W

0.98 MB

valid from 06/2017

该文件仅适用于注册用户。

注册下载
顶部顶部

We use cookies to optimize our website and improve it continuously. By continuing to use the website, you agree to the use of cookies.Privacy Policy