19-inch high-brightness color monitor for accurate display and diagnosis in the medical environment.

  • Supports different signal resolutions
  • Connection of digital and analog signals possible
  • DICOM Part 14 calibrated
  • Brightness stability
  • Control buttons on the front frame
Monitor - Lx1910 - Perfect Image Reproduction

Clear Visibility

The IPS panel technology used provides high contrast and wide viewing angles for clear visibility, even when viewing the monitor from the side. In addition, the monitor delivers flicker-free images, even at low refresh rates, alleviating eyestrain cause by a flickering screen.
Monitor - Lx1910 - Different Resolutions

Adapt Different Resolution Signals

In OR and medical imaging environments, various equipment supporting different video signals and resolutions is frequently used. The monitor can display video input signals in their actual size, enlarged, or displayed over the entire screen, depending on user needs.
Monitor - Lx1910 - Video Inputs

Digital and Analog Video Inputs

The monitor has both DisplayPort™ and DVI-I input connections, allowing for flexible connection to modern or legacy imaging systems, whether the image source is digital or analog. The monitor automatically displays the connected analog video signal. If this is not sufficient, the display settings can be adjusted by using the On Screen Display (OSD). The monitor comes with D-Sub, DVI, and BNC adapters for connecting to analog systems.
Monitor - Lx1910 - Consistency DICOM Part 14

DICOM® Part 14 Calibration

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone at the factory for full compliance with DICOM® Part 14. The five default presets contain practice-based settings. Each preset meets the current specifications for diagnostic monitors as standardized in the DIN 6868-157 room classes.

Stable Brightness and Instant Image Display

EIZO’s fully automated stability function uses an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Installation on a VESA Mount

Compliance with the VESA standard enables attachment to existing mounting accessories, such as ceiling suspensions, wall fixtures, or stands.

Easy Access to Control Buttons

The monitor's OSD can be easily accessed via buttons on the front. The front location allows streamlined use when the monitor is mounted side-by-side with another screen, such as in a ceiling suspension. The OSD buttons can be locked to prevent accidental or unauthorized adjustment to the monitor.

Versatile Positioning for Improved Ergonomics

EIZO's highly versatile stand offers tilt, swivel and a wide height adjustment range enabling you to position the monitor for optimal comfort.



Model VariationsLX1910: without stand
LX1910-S: with stand
Cabinet ColorBlack
Certifications & Standards (Please contact EIZO for the latest information)CE / UKCA (Medical Device), IEC/EN60601-1, CAN/CSA C22.2 No. 60601-1, ANSI/AAMI ES60601-1, EN60601-1-2 Class B, FCC-B, RoHS, China RoHS, WEEE, CCC, BIS
Supplied Accessories (May vary by country. Please contact EIZO for details)Adapter (D-Sub - DVI), adapter (BNC - D-Sub), Utility Disk (PDF Instructions for Use)


TypeTFT Color-LCD Panel (IPS like)
Size48.3 cm / 19"
Native Resolution1280 x 1024 (5:4 aspect ratio)
Viewable Image Size (H x V)376.32 x 301.06 mm
Pixel Pitch (H x V)0.294 x 0.294 mm
Display Colors8-bit colors: 16.77 million colors
Viewing Angles (H / V, typical)178° / 178°
Brightness (typical)700 cd/m²
Recommended Brightness for Calibration400 cd/m²
Contrast Ratio (typical)1000:1
Response Time (typical)13 ms rising, 12 ms falling

Video Signals

Input TerminalsDisplayPort, DVI-I (digital and analog RGBHV)
Digital Scanning Frequency (H / V)30 - 100 kHz / 50 - 85 Hz
Analog Scanning Frequency (H / V)30 - 100 kHz / 50 - 85 Hz
Sync FormatsSync Separate, Composite Sync and SoG


UpstreamUSB 2.0: Type-B
(communication between monitor and connected PC)
DownstreamUSB 2.0: Type-A
(communication with external devices)


Power RequirementsAC 100 - 240 V: 50 / 60 Hz
Maximum Power ConsumptionLess than 45 W
Power Save ModeLess than 2 W
Power ManagementDigital: DVI DMPM
Analog: VESA DPM
Power OutputDC 5V, 1A (Hirose)

Features & Functions

MiscellaneousPrioritised input (DVI-A) for emergency signal
SensorBacklight Sensor
OSD LanguagesEnglish, German

Environmental Requirements

Degree of ProtectionIP20

Physical Specifications

Net WeightLX1910: 4.3 kg
LX1910-S: 6.1 kg
Hole Spacing (VESA Standard)100 x 100 mm, M4, depth 5-10 mm


Single Product Brochure LX1910

Single Product Brochure LX1910

762.20 KB

download / open in browser

CuratOR Products

CuratOR Products

11.35 MB

download / open in browser


Instructions for Use LX1910 / LS1910

Instructions for Use LX1910 / LS1910

1.16 MB

version 003, valid from 05/2024

download/ open in browser