19-inch high-brightness color monitor for accurate display and diagnosis in the medical environment.

  • Supports different signal resolutions
  • Connection of digital and analog signals possible
  • DICOM Part 14 calibrated
  • Brightness stability
  • Control buttons on the front frame
Monitor - Lx1910 - Perfect Image Reproduction

Clear Visibility

The IPS panel technology used provides high contrast and wide viewing angles for clear visibility, even when viewing the monitor from the side. In addition, the monitor delivers flicker-free images, even at low refresh rates, alleviating eyestrain cause by a flickering screen.
Monitor - Lx1910 - Different Resolutions

Adapt Different Resolution Signals

In OR and medical imaging environments, various equipment supporting different video signals and resolutions is frequently used. The monitor can display video input signals in their actual size, enlarged, or displayed over the entire screen, depending on user needs.
Monitor - Lx1910 - Video Inputs

Digital and Analog Video Inputs

The monitor has both DisplayPort™ and DVI-I input connections, allowing for flexible connection to modern or legacy imaging systems, whether the image source is digital or analog. The monitor automatically displays the connected analog video signal. If this is not sufficient, the display settings can be adjusted by using the On Screen Display (OSD). The monitor comes with D-Sub, DVI, and BNC adapters for connecting to analog systems.
Monitor - Lx1910 - Consistency DICOM Part 14

DICOM® Part 14 Calibration

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone at the factory for full compliance with DICOM® Part 14. The five default presets contain practice-based settings. Each preset meets the current specifications for diagnostic monitors as standardized in the DIN 6868-157 room classes.

Stable Brightness and Instant Image Display

EIZO’s fully automated stability function uses an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Installation on a VESA Mount

Compliance with the VESA standard enables attachment to existing mounting accessories, such as ceiling suspensions, wall fixtures, or stands.

Easy Access to Control Buttons

The monitor's OSD can be easily accessed via buttons on the front. The front location allows streamlined use when the monitor is mounted side-by-side with another screen, such as in a ceiling suspension. The OSD buttons can be locked to prevent accidental or unauthorized adjustment to the monitor.

Возможность компактной установки

Крепление стандарта VESA позволяет расположить монитор самыми разными способами и обеспечивает удобство монтажа в ограниченном пространстве операционной.



Модельный рядLX1910: without stand
LX1910-S: with stand
Цвет корпусаBlack
Сертификаты и стандарты (Пожалуйста, свяжитесь с EIZO для получения обновленной информации)CE / UKCA (Medical Device), IEC/EN60601-1, CAN/CSA C22.2 No. 60601-1, ANSI/AAMI ES60601-1, EN60601-1-2 Class B, FCC-B, RoHS, China RoHS, WEEE, CCC, BIS
АксессуарыAdapter (D-Sub - DVI), adapter (BNC - D-Sub), Utility Disk (PDF Instructions for Use)


ТипTFT Color-LCD Panel (IPS like)
Диагональ48.3 cm / 19"
Разрешение1280 x 1024 (5:4 aspect ratio)
Размер изображения (ГхВ)376.32 x 301.06 mm
Разрешение0.294 x 0.294 mm
Цвета дисплея8-bit colors: 16.77 million colors
Угол обзора (Г/В, тип)178° / 178°
Яркость (тип.)700 cd/m²
Рекомендуемая яркость для калибровки400 cd/m²
Контрастность (тип.)1000:1
Время отклика (тип.)13 ms rising, 12 ms falling


ВходыDisplayPort, DVI-I (digital and analog RGBHV)
Частота развертки цифрового сигнала (Г/В)30 - 100 kHz / 50 - 85 Hz
Частота развертки аналогового сигнала (Г/В)30 - 100 kHz / 50 - 85 Hz
Форматы синхронизацииSync Separate, Composite Sync and SoG


Восходящий USB портUSB 2.0: Type-B
(communication between monitor and connected PC)
Нисходящий USB портUSB 2.0: Type-A
(communication with external devices)


Требования по электропитаниюAC 100 - 240 V: 50 / 60 Hz
Макс. потребляемая мощностьLess than 45 W
Режим экономии энергииLess than 2 W
Управление электропитаниемDigital: DVI DMPM
Analog: VESA DPM
Выходная мощностьDC 5V, 1A (Hirose)

Функции и режимы

ПрочееPrioritised input (DVI-A) for emergency signal
СенсорBacklight Sensor
Язык менюEnglish, German

Экологические требования

Степень защитыIP20

Физические характеристики

Вес неттоLX1910: 4.3 kg
LX1910-S: 6.1 kg
Разметка отверстий (VESA стандарт)100 x 100 mm, M4, depth 5-10 mm


Single Product Brochure LX1910

Single Product Brochure LX1910

762,20 KB

Загрузки / Открыть в браузере

Инструкции и руководства

Instructions for Use LX1910

Instructions for Use LX1910

1,14 MB

version 001, valid from 02/2022

Загрузки/ Открыть в браузере