联系我们

简体中文

欢迎来到下载中心。

宣传册和数据表

使用说明书

安装说明书

尺寸图

参考资料

认证证书

软件

MIR 浏览器 V1.1
MIR-1 固件 V3.0

END USER LICENSE AGREEMENT

This End User License Agreement (hereafter “the Agreement”) is a legal agreement between you and EIZO Corporation and its group companies (hereafter collectively “the Company”) of the software product (hereafter “the Software”) specified in Provision 1 of the Agreement.  By installing the Software, you are agreeing to be bound by these terms and conditions in the Agreement.  If you do not agree with these terms and conditions, please do not install, copy or use the Software.

1. DEFINITION: The Software in the Agreement includes a program made and provided by the Company, and may also include associated media, printed materials and electronic documentation, all of which are provided by the Company.  The Software does not include any third-party software product provided by the Company.  The use of such third-party software product shall be governed by the third party’s end user license agreement and not by this Agreement.

2. GRANT OF LICENSE: The Company grants to you a non-exclusive right to install and use the Software on a single personal computer.

3. INTELLECTUAL PROPERTY: You do not acquire any copyrights or other intellectual property rights of the Software, except the limited right to use the Software as set forth in the Agreement.

4. COPY RESTRICTIONS: You may not copy the Software, except that you may make a single copy of the Software for your own backup or archival purposes only.  You may not use the backup copy for any purpose other than reinstalling the Software in the computers mentioned in Provision 2.  You are held legally responsible for any copying or copyright infringement which is caused or encouraged by your failure to abide by the terms of this restriction.

5. TRANSFER RESTRICTIONS: You may not allow the Software to be used by anyone else through transfer, rent, lease or any other means, whether with compensation or not, without the prior written consent of the Company.

6. MODIFICATION AND REVERSE ENGINEERING RESTRICTIONS: You may not reverse engineer, disassemble, decompile, modify, adapt, translate, or create derivative works based on the Software, delete or modify the intellectual property mark in the Software, without the prior written consent of the Company. Notwithstanding the foregoing, the Agreement does not restrict modification of all or part of the Library, if any, which is separately licensed, as long as such licensed terms and conditions permit such modification. The Agreement does not restrict reverse engineering for the purpose of debugging such modification.

7. TERMINATION: This Agreement is effective until terminated.  The Agreement will terminate automatically, without notice from the Company and become null and void if you fail to comply with any provisions of the Agreement.  Upon termination, the Company may request you to destroy the Software and all copies of the Software.  In addition to, or instead of the request mentioned above, the Company may claim damages against you.

8. SOFTWARE UPGRADES: In the case where the Company provides you an upgraded version or additional functions of the Software (hereafter “the New Software”), unless provided specific provisions in the New Software, the provisions of this Agreement shall be applied to the New Software.

9. LIMITED WARRANTY:

  1. In the case that the company provides the software for a fee, the warranty of the Software shall be the followings (hereafter “the Warranty”).  Except for the Warranty, the Company disclaims all warranties, express, implied, statutory or otherwise, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and nonexistence of virus with respect to the Software.
  2. In the event that the Software is found defective when properly used in accordance with the User’s Manual under the operating environment stipulated in the User’s Manual or any other associated documentation (including electronic documentation), the Company, at its option, will repair or replace the Software at no charge or refund the payment for the Software, provided within fourteen (14) days of its receipt.
  3. The Warranty does not apply to defects in the Software resulting from reasons which are outside of the Company’s control including natural disaster, an act of third party, other casualty or accident, or your intentional or negligent act.  The Warranty does not apply to defects in the Software resulting from incidents occurred after your purchase including improper or inadequate operation or maintenance, unauthorized modification or misuse, installation in a defective personal computer.
  4. Warranty period for any replacement or repair of the Software under the Warranty shall expire either the end of the original warranty period or after seven (7) days from delivery of the replacement or repair, whichever comes later.
  5. In the case that the Company provides the Software free of charge, the Software is provided on an AS IS basis and the Company disclaims all warranties, express, implied, statutory or otherwise, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and nonexistence of virus with respect to the Software.

10. LIMITATION OF LIABILITY:

  1. In no event, shall the Company be liable for any direct, indirect, incidental, special or consequential damages (including, without limitation, damages for loss of business profit, business interruption, loss of business information, or any other pecuniary loss) arising out of the defects in the Software (including the defects to which the Warranty set forth in the preceding provision apply), the use or inability to use the Software or in any connection with the Software, except that such damages are caused by the Company’s intention or gross negligence.
  2. In no event pecuniary liability of the Company for damages with respect to the Software exceeds the amounts actually paid by you, if any, for the Software.

11. GOVERNING LAW AND JURISDICTION:

  1. This Agreement shall be construed in accordance with the laws of Japan.
  2. Any legal action to enforce or interpret the terms of this Agreement shall be brought exclusively in the Tokyo District Court, Tokyo, Japan.

EIZO Corporation, 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan

END USER LICENSE AGREEMENT (MIR-1 firmware)

This End User License Agreement (hereafter “the Agreement”) is a legal agreement between you and EIZO Corporation (hereafter “the Company”) of the software product (hereafter “the Software”) specified in Provision 1 of the Agreement.  By installing the Software, you are agreeing to be bound by these terms and conditions in the Agreement.  If you do not agree with these terms and conditions, please do not install, copy or use the Software.

  1. DEFINITION: The Software in the Agreement shall mean the firmware for the Company’s product as indicated at the top of the Agreement (hereafter “the Product”).  The Software may also include associated media (CD-ROM, DVD-ROM, etc), printed materials and electronic documentation, all of which are provided by the Company.  The Software does not include any third-party software product provided by the Company.  The use of such third-party software product shall be governed by the third party’s end user license agreement and not by this Agreement.
  2. GRANT OF LICENSE: The Company grants to you a non-exclusive right to install and use the Software on the Product.  Depending on the type of the Product, a separate license may need to be purchased to use the functions made available by the upgrade.
  3. OWNERSHIP OF INTELLECTUAL PROPERTY: The Company retains all rights, title and ownership to the Software, and the copyright and any other intellectual properties concerning the Software.
  4. COPY RESTRICTIONS: You may not copy the Software, except that you may make a single copy of the Software for your own backup or archival purposes only.  You may not use the backup copy for any purpose other than reinstalling the Software in the computers mentioned in Provision 2.  You are held legally responsible for any copying or copyright infringement which is caused or encouraged by your failure to abide by the terms of this restriction.
  5. TRANSFER RESTRICTIONS: You may not allow the Software to be used by anyone else through transfer, rent, lease or any other means, whether with compensation or not, without the prior written consent of the Company.
  6. MODIFICATION AND REVERSE ENGINEERING RESTRICTIONS: You may not reverse engineer, disassemble, decompile, modify, adapt, translate, or create derivative works based on the Software, delete or modify the intellectual property mark in the Software, without the prior written consent of the Company. Notwithstanding the foregoing, the Agreement does not restrict modification of all or part of the Library, if any, which is separately licensed, as long as such licensed terms and conditions permit such modification. The Agreement does not restrict reverse engineering for the purpose of debugging such modification.
  7. TERMINATION: This Agreement is effective until terminated.  The Agreement will terminate automatically, without notice from the Company and become null and void if you fail to comply with any provisions of the Agreement.  Upon termination, the Company may request you to return or destroy the Software and all copies of the Software.  In addition to, or instead of the request mentioned above, the Company may claim damages against you.
  8. SOFTWARE UPGRADES: In the case where the Company provides you an upgraded version or additional functions of the Software (hereafter “the New Software”), unless provided specific provisions in the New Software, the provisions of this Agreement shall be applied to the New Software.
  9. NO WARRANTY: The Software is provided on an AS IS basis and the Company disclaims all warranties, express, implied, statutory or otherwise, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and nonexistence of virus with respect to the Software.
  10. LIMITATION OF LIABILITY: In no event, shall the Company be liable for any direct, indirect, incidental, special or consequential damages (including, without limitation, damages for loss of business profit, business interruption, loss of business information, or any other pecuniary loss) arising out of the defects in the Software, the use or inability to use the Software or in any connection with the Software, except that such damages are caused by the Company’s intention or gross negligence.
  11. GOVERNING LAW AND JURISDICTION:(1) This Agreement shall be construed in accordance with the laws of Japan.
    (2) Any legal action to enforce or interpret the terms of this Agreement shall be brought exclusively in the Tokyo District Court, Tokyo, Japan.
 

END USER LICENSE AGREEMENT

This End User License Agreement (hereafter “the Agreement”) is a legal agreement between you and EIZO Corporation and its group companies (hereafter collectively “the Company”) of the software product (hereafter “the Software”) specified in Provision 1 of the Agreement. By installing the Software, you are agreeing to be bound by these terms and conditions in the Agreement. If you do not agree with these terms and conditions, please do not install, copy or use the Software.

1. DEFINITION: The Software in the Agreement includes a program made and provided by the Company, and may also include associated media, printed materials and electronic documentation, all of which are provided by the Company. The Software does not include any third-party software product provided by the Company. The use of such third-party software product shall be governed by the third party’s end user license agreement and not by this Agreement.

2. GRANT OF LICENSE: The Company grants to you a non-exclusive right to install and use the Software on a single personal computer.

3. INTELLECTUAL PROPERTY: You do not acquire any copyrights or other intellectual property rights of the Software, except the limited right to use the Software as set forth in the Agreement.

4. COPY RESTRICTIONS: You may not copy the Software, except that you may make a single copy of the Software for your own backup or archival purposes only. You may not use the backup copy for any purpose other than reinstalling the Software in the computers mentioned in Provision 2. You are held legally responsible for any copying or copyright infringement which is caused or encouraged by your failure to abide by the terms of this restriction.

5. TRANSFER RESTRICTIONS: You may not allow the Software to be used by anyone else through transfer, rent, lease or any other means, whether with compensation or not, without the prior written consent of the Company.

6. MODIFICATION AND REVERSE ENGINEERING RESTRICTIONS: You may not reverse engineer, disassemble, decompile, modify, adapt, translate, or create derivative works based on the Software, delete or modify the intellectual property mark in the Software, without the prior written consent of the Company. Notwithstanding the foregoing, the Agreement does not restrict modification of all or part of the Library, if any, which is separately licensed, as long as such licensed terms and conditions permit such modification. The Agreement does not restrict reverse engineering for the purpose of debugging such modification.

7. TERMINATION: This Agreement is effective until terminated. The Agreement will terminate automatically, without notice from the Company and become null and void if you fail to comply with any provisions of the Agreement. Upon termination, the Company may request you to destroy the Software and all copies of the Software. In addition to, or instead of the request mentioned above, the Company may claim damages against you.

8. SOFTWARE UPGRADES: In the case where the Company provides you an upgraded version or additional functions of the Software (hereafter “the New Software”), unless provided specific provisions in the New Software, the provisions of this Agreement shall be applied to the New Software.

9. LIMITED WARRANTY:

  1. In the case that the company provides the software for a fee, the warranty of the Software shall be the followings (hereafter “the Warranty”). Except for the Warranty, the Company disclaims all warranties, express, implied, statutory or otherwise, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and nonexistence of virus with respect to the Software.
  2. In the event that the Software is found defective when properly used in accordance with the User’s Manual under the operating environment stipulated in the User’s Manual or any other associated documentation (including electronic documentation), the Company, at its option, will repair or replace the Software at no charge or refund the payment for the Software, provided within fourteen (14) days of its receipt.
  3. The Warranty does not apply to defects in the Software resulting from reasons which are outside of the Company’s control including natural disaster, an act of third party, other casualty or accident, or your intentional or negligent act. The Warranty does not apply to defects in the Software resulting from incidents occurred after your purchase including improper or inadequate operation or maintenance, unauthorized modification or misuse, installation in a defective personal computer.
  4. Warranty period for any replacement or repair of the Software under the Warranty shall expire either the end of the original warranty period or after seven (7) days from delivery of the replacement or repair, whichever comes later.
  5. In the case that the Company provides the Software free of charge, the Software is provided on an AS IS basis and the Company disclaims all warranties, express, implied, statutory or otherwise, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and nonexistence of virus with respect to the Software.

10. LIMITATION OF LIABILITY:

  1. In no event, shall the Company be liable for any direct, indirect, incidental, special or consequential damages (including, without limitation, damages for loss of business profit, business interruption, loss of business information, or any other pecuniary loss) arising out of the defects in the Software (including the defects to which the Warranty set forth in the preceding provision apply), the use or inability to use the Software or in any connection with the Software, except that such damages are caused by the Company’s intention or gross negligence.
  2. In no event pecuniary liability of the Company for damages with respect to the Software exceeds the amounts actually paid by you, if any, for the Software.

11. GOVERNING LAW AND JURISDICTION:

  1. This Agreement shall be construed in accordance with the laws of Japan.
  2. Any legal action to enforce or interpret the terms of this Agreement shall be brought exclusively in the Tokyo District Court, Tokyo, Japan.

EIZO Corporation, 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan

END USER LICENSE AGREEMENT (MIR-1 firmware)

This End User License Agreement (hereafter “the Agreement”) is a legal agreement between you and EIZO Corporation (hereafter “the Company”) of the software product (hereafter “the Software”) specified in Provision 1 of the Agreement. By installing the Software, you are agreeing to be bound by these terms and conditions in the Agreement. If you do not agree with these terms and conditions, please do not install, copy or use the Software.

  1. DEFINITION: The Software in the Agreement shall mean the firmware for the Company’s product as indicated at the top of the Agreement (hereafter “the Product”). The Software may also include associated media (CD-ROM, DVD-ROM, etc), printed materials and electronic documentation, all of which are provided by the Company. The Software does not include any third-party software product provided by the Company. The use of such third-party software product shall be governed by the third party’s end user license agreement and not by this Agreement.
  2. GRANT OF LICENSE: The Company grants to you a non-exclusive right to install and use the Software on the Product. Depending on the type of the Product, a separate license may need to be purchased to use the functions made available by the upgrade.
  3. OWNERSHIP OF INTELLECTUAL PROPERTY: The Company retains all rights, title and ownership to the Software, and the copyright and any other intellectual properties concerning the Software.
  4. COPY RESTRICTIONS: You may not copy the Software, except that you may make a single copy of the Software for your own backup or archival purposes only. You may not use the backup copy for any purpose other than reinstalling the Software in the computers mentioned in Provision 2. You are held legally responsible for any copying or copyright infringement which is caused or encouraged by your failure to abide by the terms of this restriction.
  5. TRANSFER RESTRICTIONS: You may not allow the Software to be used by anyone else through transfer, rent, lease or any other means, whether with compensation or not, without the prior written consent of the Company.
  6. MODIFICATION AND REVERSE ENGINEERING RESTRICTIONS: You may not reverse engineer, disassemble, decompile, modify, adapt, translate, or create derivative works based on the Software, delete or modify the intellectual property mark in the Software, without the prior written consent of the Company. Notwithstanding the foregoing, the Agreement does not restrict modification of all or part of the Library, if any, which is separately licensed, as long as such licensed terms and conditions permit such modification. The Agreement does not restrict reverse engineering for the purpose of debugging such modification.
  7. TERMINATION: This Agreement is effective until terminated. The Agreement will terminate automatically, without notice from the Company and become null and void if you fail to comply with any provisions of the Agreement. Upon termination, the Company may request you to return or destroy the Software and all copies of the Software. In addition to, or instead of the request mentioned above, the Company may claim damages against you.
  8. SOFTWARE UPGRADES: In the case where the Company provides you an upgraded version or additional functions of the Software (hereafter “the New Software”), unless provided specific provisions in the New Software, the provisions of this Agreement shall be applied to the New Software.
  9. NO WARRANTY: The Software is provided on an AS IS basis and the Company disclaims all warranties, express, implied, statutory or otherwise, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and nonexistence of virus with respect to the Software.
  10. LIMITATION OF LIABILITY: In no event, shall the Company be liable for any direct, indirect, incidental, special or consequential damages (including, without limitation, damages for loss of business profit, business interruption, loss of business information, or any other pecuniary loss) arising out of the defects in the Software, the use or inability to use the Software or in any connection with the Software, except that such damages are caused by the Company’s intention or gross negligence.
  11. GOVERNING LAW AND JURISDICTION:(1) This Agreement shall be construed in accordance with the laws of Japan.
    (2) Any legal action to enforce or interpret the terms of this Agreement shall be brought exclusively in the Tokyo District Court, Tokyo, Japan.